HAM-LET® H-99 Screwed Bonnet Needle Valves

The Ham-Let® H-99 Series offers a general service valve of rugged design and construction. It is available in stainless steel to suit a wide range of services.

It is capable of withstanding high pressures (10,000 psig max) and high temperature.

This valve is typically used in a severe environment, high pressure sampling systems, high pressure shut down systems and test standards.

The H-99 Needle Valves are available with a choice of stem tips:

• Regulating: Used where some degree of flow control is required.
• V-Stem: Standard stem tip used for general-purpose liquids and gases.
• Non-Rotating: Typically used in high-cycle applications to extend valve life. It is designed to prevent galling between the seat and stem.

Testing:

• The H-99 Series designs have been tested for Proof and Burst
• Every H-99 valve is factory tested with nitrogen at 1000 psi.
• Maximum allowable leakage across the seat is 0.1 std cc/min.

Packing Adjustment:

• Due to the varied service applications of the valve, packing adjustment may occasionally be necessary.
• Packing is factory pre-adjusted to 1000 psig service.
• Initial packing adjustment is recommended after installation and prior to start-up.

HAM-LET® H-99 Needle Valve NPT

From £77.99 ex VAT